Setting up a computer
You have a new computer and are ready to set it up. While this may seem like an overwhelming and difficult task, it is actually quite simple. It doesn't matter what brand of computer you have because most computers are set up in a similar way.
If you're setting up a newly purchased computer that's still in the box, you'll probably find a how-to guide in the packaging that includes step-by-step details. However, even if it didn't include instructions you can still set up the computer in a few easy steps. In this lesson, we'll go through the different steps needed to set up a typical computer.
Watch the video to learn how to set up a desktop computer.
Setting up a laptop computer
If you have a laptop, setup should be easy: Just open it and press the power button. If the battery isn't charged, you'll need to plug in the AC adapter. You can continue using the laptop while it charges.
If your laptop has any peripherals, like external speakers, you may want to read the instructions below because laptops and desktops generally use the same types of connections.
Setting up a desktop computer
Step 1
Unpack the monitor and computer case from the box. Remove any plastic covering or protective tape. Place the monitor and computer case where you want on a desk or work area.
Think about where you want your desk or work area to be located, and where you want your monitor, computer case, and other hardware to be. Be sure to place your computer case in an area that is well ventilated and that has good air flow. This will help to prevent overheating.
Step 2
Locate the monitor cable. There are several types of monitor cables, so the one on your computer may not look like the one in the image at the left. If you're having trouble finding your monitor cable, refer to the instruction manual for your computer. (If you have an all-in-one computer that's built into the monitor, you can skip to Step 4).
Step 3
Connect one end of the cable to the monitor port on the back of thecomputer case and the other end to the monitor. Hand tighten the plastic-covered screws on the monitor cable to secure it.
Many computer cables will only fit a specific way. If the cable doesn't fit, don't force it or you might damage the connectors. Make sure the plug aligns with the port, then connect it.
To figure out which cables belong in which ports, try our Connecting Cables interactive.
ليست هناك تعليقات:
إرسال تعليق